Diagnosis and troubleshooting Proline Prosonic Flow P 500 HART
180 Endress+Hauser
12.10.3 Overview of information events
Unlike a diagnostic event, an information event is displayed in the event logbook only and
not in the diagnostic list.
Info number Info name
I1000 --------(Device ok)
I1079 Sensor changed
I1089 Power on
I1090 Configuration reset
I1091 Configuration changed
I1092 HistoROM backup deleted
I1137 Electronics changed
I1151 History reset
I1155 Reset electronics temperature
I1156 Memory error trend
I1157 Memory error event list
I1256 Display: access status changed
I1264 Safety sequence aborted
I1278 I/O module restarted
I1327 Zero point adjust failed signal path
I1335 Firmware changed
I1361 Web server: login failed
I1397 Fieldbus: access status changed
I1398 CDI: access status changed
I1444 Device verification passed
I1445 Device verification failed
I1457 Measurement error verification failed
I1459 I/O module verification failed
I1461 Sensor verification failed
I1462 Sensor electronic module verific. failed
I1512 Download started
I1513 Download finished
I1514 Upload started
I1515 Upload finished
I1517 Custody transfer active
I1518 Custody transfer inactive
I1554 Safety sequence started
I1555 Safety sequence confirmed
I1556 Safety mode off
I1618 I/O module 2 replaced
I1619 I/O module 3 replaced
I1621 I/O module 4 replaced
I1622 Calibration changed
I1624 All totalizers reset
To Next Page
Loading...
