Proline Prosonic Flow P 500 HART Mounting
Endress+Hauser 43
20 (0.79)
100 (3.94)
100 (3.94)
! 8.6 (0.39)
! 18 (0.71)
! 10 (0.39)
A0029068
41 Engineering unit mm (in)
1. Drill the holes.
2. Insert wall plugs into the drilled holes.
3. Screw in the fixing screws slightly.
4. Fit the transmitter housing over the fixing screws and mount in place.
5. Tighten the fixing screws.
Pipe mounting
Required tools
Open-ended wrench AF 13
L
WARNING
Order code for "Transmitter housing", option L "Cast, stainless": cast transmitters are
very heavy.
They are unstable if they are not mounted on a secure, fixed post.
‣
Only mount the transmitter on a secure, fixed post on a stable surface.
1
4 x
SW 13
! … (! 0.79 to 2.75)20 70
A0029057
42 Engineering unit mm (in)
To Next Page
Loading...
