Proline Prosonic Flow P 500 HART Technical data
Endress+Hauser 205
Temperature tables
Observe the interdependencies between the permitted ambient and fluid
temperatures when operating the device in hazardous areas.
For detailed information on the temperature tables, see the separate document
entitled "Safety Instructions" (XA) for the device.
Storage temperature The storage temperature for all components (except display modules and order code for
"Sensor version", options AG, AH) corresponds to the ambient temperature range→ 27.
Order code for "Sensor version", options AG, AH: –50 to +80 °C (–58 to +176 °F)
Display modules
–40 to +80 °C (–40 to +176 °F)
Relative humidity The device is suitable for use in outdoor and indoor areas with a relative humidity of
5 to 40%.
Operating height According to EN 61010-1
• ≤ 2 000 m (6 562 ft)
• > 2 000 m (6 562 ft) with additional overvoltage protection (e.g. Endress+Hauser HAW
Series)
Degree of protection Transmitter
• IP66/67, Type 4X enclosure, suitable for pollution degree 4
• When the housing is open: IP20, Type 1 enclosure, suitable for pollution degree 2
• Display module: IP20, Type 1 enclosure, suitable for pollution degree 2
Sensor
Order code for "Sensor version", options AA, AB, AC, AD, AE:
• IP68, Type 6P enclosure, suitable for pollution degree 4
• For the operation of the device under water
• Operating duration at a maximum depth of:
• 3 m (10 ft): permanent use
• 10 m (30 ft): maximum 48 hours
Order code for "Sensor version", options AG, AH:
IP66/67, Type 4X enclosure, suitable for pollution degree 4
When the housing is open: IP20, Type 1 enclosure, suitable for pollution degree 2
Optional
External WLAN antenna
IP67
Shock and vibration
resistance
Vibration sinusoidal, in accordance with IEC 60068-2-6
• 2 to 8.4 Hz, 7.5 mm peak
• 8.4 to 2 000 Hz, 2 g peak
Vibration broad-band random, according to IEC 60068-2-64
• 10 to 200 Hz, 0.01 g
2
/Hz
• 200 to 2 000 Hz, 0.003 g
2
/Hz
• Total: 2.70 g rms
To Next Page
