Endress+Hauser Proline Prosonic Flow P 500 - Page 65

Proline Prosonic Flow P 500 HART Operation options
Endress+Hauser 65
Flow velocity
Temperature
• Density
• Reference density
Signal to noise ratio
Acceptance rate
Turbulence
Signal strength
°API
The number and display format of the measured variables can be configured via the
Format display parameter (→  122).
Totalizer
Symbol Meaning
Totalizer

The measurement channel number indicates which of the three totalizers is
displayed.
Output
Symbol Meaning
Output

The measurement channel number indicates which of the outputs is displayed.
Input
Symbol Meaning
Status input
Measurement channel numbers
Symbol Meaning
Measurement channel 1 to 4

The measurement channel number is displayed only if more than one channel is
present for the same measured variable type (e.g. totalizer 1 to 3).
Diagnostic behavior
Symbol Meaning
Alarm
• Measurement is interrupted.
• Signal outputs and totalizers assume the defined alarm condition.
• A diagnostic message is generated.
Warning
• Measurement is resumed.
• The signal outputs and totalizers are not affected.
• A diagnostic message is generated.
The diagnostic behavior pertains to a diagnostic event that is relevant to the displayed
measured variable.