Endress+Hauser Proline Prosonic Flow W 400 - Page 110

Commissioning Proline Prosonic Flow W 400 HART
110 Endress+Hauser
Navigation
"Setup" menu → Advanced setup → WLAN settings
‣
WLAN settings
WLAN
→  110
WLAN mode
→  110
SSID name
→  110
Network security
→  110
Security identification
→  111
User name
→  111
WLAN password
→  111
WLAN IP address
→  111
WLAN MAC address
→  111
WLAN passphrase
→  111
Assign SSID name
→  111
SSID name
→  111
Connection state
→  111
Received signal strength
→  111
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry / User
interface
Factory setting
WLAN – Switch WLAN on and off. • Disable
• Enable
–
WLAN mode – Select WLAN mode. WLAN access point –
SSID name The client is activated. Enter the user-defined SSID
name (max. 32 characters).
– –
Network security – Select the security type of the
WLAN network.
• Unsecured
• WPA2-PSK
• EAP-PEAP with
MSCHAPv2
*
• EAP-PEAP
MSCHAPv2 no
server authentic.
*
• EAP-TLS
*
–