Endress+Hauser Proline Prosonic Flow W 400 - Page 113

Proline Prosonic Flow W 400 HART Commissioning
Endress+Hauser 113
Navigation
"Setup" menu → Advanced setup → Administration → Define access code
‣
Define access code
Define access code
→  113
Confirm access code
→  113
Parameter overview with brief description
Parameter Description User entry
Define access code Specify an access code that is required to obtain the access
rights for the Maintenance role.
Max. 16-digit character string comprising
numbers, letters and special characters
Confirm access code Confirm the access code entered for the Maintenance role. Max. 16-digit character string comprising
numbers, letters and special characters
Using the parameter to reset the access code
Navigation
"Setup" menu → Advanced setup → Administration → Reset access code
‣
Reset access code
Operating time
→  113
Reset access code
→  113
Parameter overview with brief description
Parameter Description User interface / User entry
Operating time Indicates how long the device has been in operation. Days (d), hours (h), minutes (m) and seconds
(s)
Reset access code Enter the code provided by Endress+Hauser Technical Support
to reset the Maintenance code.

For a reset code, contact your Endress+Hauser service
organization.
The reset code can only be entered via:
• Web browser
• DeviceCare, FieldCare (via CDI-RJ45 service interface)
• Fieldbus
Character string comprising numbers, letters
and special characters
Using the parameter to reset the device
Navigation
"Setup" menu → Advanced setup → Administration