Endress+Hauser Prosonic S FMU90 - 2.6 Certificates and approvals; 2.7 Registered trademarks

Notes on use
11
Selecting a submenu
!
Note!
If necessary, you can return to the previous level of the menu by pressing .
L00-FMU90xxx-19-00-00-yy-039
1. In the main menu, press W or V until the
required submenu is marked by the bar.
!
Note!
The symbols indicate that the
selection list contains more items than can be
displayed on the module. Press W or V several
times, to mark one of the hidden items.
2. Press ↵, in order to enter the marked
submenu.
3. If the submenu contains further submenus,
continue until you reach the level of the
parameter sets. This level is reached if the
softkey symbols U and T appear.
1.
2.
3.
main menu
“device properties”
submenu
“distance unit”
parameter set