Notes on use
7
1.1.2 The operating menu
Structure of the menu
The parameters of the Prosonic S are organized in an operating menu (consisting of a main menu
and several submenus). Parameters which are related to each other are comprised in a common
parameter set. To simplify the navigation within the menu, a five-digit position code is displayed
with each parameter set.
L00-FMU90xxx-19-00-00-en-037
Identification of the parameter sets; A: submenu; B: number of the associated input or output; C: number of the parameter
set within the submenu
•The first digit (A) specifies the submenu
1)
:
– L: "level"
– F: "flow"
– A: "safety settings"
– R: "relay/controls"
– O: "output/calculations"
– D: "device properties", "calibr. display" and "sensor management"
– I: "system information"
– S: "service" (only available if the service password has been entered)
Diagrams of the submenus can be found in the chapter "Operating menu".
•The second digit (B) is used if the parameter set occurs several times within the Prosonic S (e.g.
for different inputs or outputs).
Example:
– O1201: "allocation current" for output 1
– O2201: "allocation current" for output 2
If the parameter set occurs only once wihtin the Prosonic S, "X" is indicated at this position.
•The last three digits (C) specify the individual parameter sets within the submenu.
Locking
Locks the instrument against parameter changes.
The instrument can only be unlocked again by the keys.
Key combination Meaning
CB
A
1) Depending on the instrument version, the installation environment and the selected operating mode, some of the submenus may not be present.
To Next Page
Loading...
