The "relays/controls" menu
79
5.1.8 "relay N" (N = 1 - 6)
(Parametrization of a diagnostic relay)
"allocation 1/2"
A specific instrument state or event can be allocated to each of these parameters. The relay is de-
energized as soon as one of these states or events occurs.
Selection:
• echoloss sensor 1/2/1+2
• defective temperature sensor1/2
• defective external temperature sensor
• Accumulated alarm: defective temperature sensor
•overtemp. sensor 1/2
• Accumulated Alarm: overtemp.
• safety distance channel 1/2
• Accumulated Alarm: safety distance
5.1.9 "relay N" (N = 1 ...6)
(Parametrization of a backwater alarm relay)
For a backwater alarm relay, no additional parameters are required. Press "→" in order to proceed
to the next parameter set.
5.1.10 "relay N" (N = 1 ...6)
(Parametrization of a dirt alarm relay)
For a dirt alarm relay, no additional parameters are required. Press "→" in order to proceed to the
next parameter set.
⇒
relay 2 R2103
function: diagnostics
allocation 1:
allocation 2:
⇒
relay 2 R2103
function: backwat. alarm
⇒
relay 2 R2103
function: dirt alarm
To Next Page
Loading...
