Endress+Hauser Prosonic S FMU90 - 12.11 Temperature sensor FMT131

The "sensor management" menu
159
11.2 The "external temperature sensor" submenu
!
Note!
This submenu is only available for instruments with external temperature input
(FMU90-********B***).
11.2.1 "external temperature sensor"
(parametrization)
"sensor type"
Defines the type of the connected sensor.
Selection:
• no sensor (default)
•FMT131
•PT100
"temperature unit"
Displays the temperature unit.
!
Note!
The temperature unit can be changed in "device properties/operating parameters/temperature
unit".
11.2.2 "external temperature sensor"
(index pointer)
"max. value"
Displays the highest temperature which has been reached until now.
"min. value"
Displays the lowest temperature which has been reached until now.
"actual value"
Displays the currently measured temperature.
⇒
ext.temp. sensor D1020
sensor type:
temperature unit:
⇒
ext.temp. sensor D1021
max. value:
min. value:
actual value:
reset: