Endress+Hauser Prosonic S FMU90 - 4.8 Synchronization line; 4.9 Connection of the separate display and operating module

The "level" menu
32
2.1.10 "LVL N state" (N = 1 or 2)
"level N" (N = 1 or 2)
Displays the currently measured level.
"act. distance N" (N = 1 or 2)
Dispalys the currently measured distance.
"status"
Use this parameter to define the status of the interference echo suppression.
• enable map
Choose this option in order activate the interference echo suppression. The mapping is then used
for signal evaluation.
• disable map
Choose this option in order to deactivate the interference echo suppression. The mapping is then
no longer used for signal evaluation but it can be reactivated if required.
• delete map
Choose this option in order to delete the mapping. It can not be reactivated again and the
instrument uses the preprogrammed default mapping.
⇒
LVL1 state L100C
level 1:
act. distance 1:
status: