EnGenius EOC1650 - Page 23

EnGenius EOC1650 Wireless Access Point / Client Bridge Version 2.0
23


 Data Rate: If you wouldlike to forcea data rate, you may select one from thedrop‐down list.
However,forbestperformanceitisrecommendedtousetheAutosetting.
 Transmit Power: You may have the different application distance of the device by selecting a
value
fromthedrop‐downlist.Thisfeaturecanbehelpfulinrestrictingthecoverageareaofthe
wirelessnetwork.
 Fragment Length: Packets over the specified size will be fragmented in order to improve
performanceonnoisynetworks.
 RTS/CTSThreshold:Packetsoverthespecifiedsizewillusethe
RTS/CTSmechanismtomaintain
performanceinnoisynetworksandpreventinghiddennodesfromdegradingtheperformance.
 Protection Mode: If your wireless network is using both 802.11b and 802.g devices then it is
recommended to enable this feature so that the 802.11b devices will not degrade the
performanceof802.11g
devices.
 WMM:EnablewirelessQualityofService
 Distance(1‐30km):Specifyadistancebetween1and30Km.
 Channel Bandwidth: For different application, you can select 20MHz, 10MHz or 5MHz channel
bandwidth.
 ClickontheApplybuttontosavethechanges.
