10-6 Replacing Ink Cartridges
c
Caution:
Do not open the clamp again until you are ready to replace
the cartridge. Opening a clamp may cause the currently
installed cartridge to become unusable.
Note:
If you also need to replace the black ink cartridge, you can do so now.
Press the
R
cleaning button and release quickly. The print head
automatically moves to the replacement position for black. Refer to
“Replacing a black ink cartridge” on page 10-7.
6. Press the
R
cleaning button and release quickly. The ink
delivery system begins charging the ink. When charging is
finished, the print head returns to its home position and the
P
power light comes on.
Note:
If you replace the ink cartridge before a print job is finished, the
Stylus Scan automatically prints the remaining pages of the print
job.
c
Caution:
The
P
power light continues to flash while charging is in
progress. Never turn off the Stylus Scan while this light is
flashing. Turning off the Stylus Scan during charging may
result in incomplete charging of ink.
7. Close the front cover.
To Next Page
Loading...
Need help?
General
