1-30 Features and General Specifications Rev. A
Indicators
The indicators are located on the operation panel. (See Figure 1-1.)
POWER LED (green)
On: Stable power (+5 V) is supplied.
Off: Stable power (+5 V) is not supplied.
ERROR LED (red)
On: Printer is off-line (except when paper is being advanced with the FEED buttons
and during self test printing).
Off: Normal operation
Flashing: An error has occurred. (See Error Types and Countermeasures on page 4-23).
RECEIPT OUT LED (red)
On: Near-end condition or paper end is detected for paper roll at receipt side.
Off: Paper roll at receipt side is sufficient.
Flashing: Stand by for test printing
JOURNAL OUT LED (red)
On: Near-end condition or paper end is detected for paper roll at journal side.
Off: Paper roll at journal side is sufficient.
Flashing: Stand by for test printing
SLIP LED (green)
On: Slip paper mode
Off: Two-sheet (paper roll) mode
CONFIDENTIAL
To Next Page
Loading...
