Epson TM-U950 - Using the Printer; Operating the Control Panel

Rev. A Features and General Specifications 1-29
TM-U950/U950P Technical Manual
DIP switch settings for the TM-U950P
Note
❏
DIP switches are effective only while the printer power is turned on. If the DIP switch setting is
changed after the printer power is turned on, the change is not effective.
Table 1-9a. DIP Switch Bank 1
Switch number Function ON OFF
1Undefined——
2Undefined——
3Undefined——
4Undefined——
5Undefined——
6 Internal use — Fixed
7Undefined——
8Undefined——
Table 1-10a. DIP Switch Bank 2
Switch number Function ON OFF
1 Auto line feed Always enabled Always disabled
2 Receiver buffer 32 bytes 2048 bytes
3 Font selection (default) 9x9 7x9
4
Carriage moving speed
(default for paper roll printing)
Low High
5 Handshaking (BUSY condition) Receive buffer-full Off-line or receive buffer-full
6 Internal use Fixed —
7Undefined — —
8 Internal use Fixed —
CONFIDENTIAL