194 Eos Operations Manual
Mark Symbols
The symbols that appear in the Mark flag include:
• D. . . . . . . . . . . . . . . . . . .AutoMark is disabled.
• R. . . . . . . . . . . . . . . . . . .Indicates a manual reference override. Manual changes have
been made that override a previously stored reference (such
as to a palette or preset). Once recorded, the reference will
be broken. If updated, the referenced target will be updated
as well, unless otherwise instructed.
• M . . . . . . . . . . . . . . . . . .Indicates a mark is placed, but manual, and must be stored.
Is blue when stored.”m” indicates cue is not marking.
• + . . . . . . . . . . . . . . . . . . .Indicates a cue is both a marking and reference cue when
displayed in the mark flag.
• - . . . . . . . . . . . . . . . . . . .Indicates a dark move, a cue that has any non-intensity
parameters moving on channels whose intensity is at 0.
• x . . . . . . . . . . . . . . . . Indicates that a mark has been placed, but the mark has been
broken. If possible, Eos will automark the lights.
To Next Page
Loading...
