A Eos Configuration Utility 311
Appendix A
Eos Configuration Utility
Overview
This appendix covers the Eos Configuration Utility (ECU) and
its use. This is a component of the Eos Lighting Control System
and is used for both system configuration and performing basic
level test functions. These instructions illustrate how to use the
utility, but do not specify what changes to make as these are
based on your preferences and can be changed to suit your
control needs.
What the Utility Does
Here is a brief list of some of the actions that can be performed from the ECU.
• Configure the IP address of the console
• Configure the services to provide IP addresses to other devices
• Configure the logical monitor placement to match the physical monitors
• Set the date, time and time zone
• Change the language the system uses
• Change the alphanumeric keyboard layout
• Choose to boot the console in Primary, Client, Backup or Offline mode
• Perform a simple button and encoder response test
• Calibrate the touchscreens
• Configure the external monitors
• Update software
• Save log files
• Deep clear the system
• Using the file manager
To Next Page
Loading...
