208 Eos Operations Manual
Storing Data with Record Filters
If a record target is stored with filters in place, the filters allow only associated parameter data to be
recorded in the target. Non-filtered data is not included when you record.
The various record targets are affected by filters in the following ways:
• Palettes - Palettes by definition are already filtered. The color and beam filters can be used
to further modify what is stored in the color and beam palettes, however.
• Presets - Active filter settings impact what is stored in presets.
• Cues - Active filter settings impact what is stored in cues, even when using “record only”
commands.
• [Update] - Filter settings are ignored.
• [Recall From] - Recall from instructions are not affected by the filters.
To Next Page
Loading...
