40 Eos Operations Manual
[Data] Key
Pressing and holding [Data] allows you to view the values behind any referenced or marked data.
[Data] exposes the next lower reference level. So if you view a palette reference and press [Data],
the absolute data will be displayed instead. If you are viewing a preset, absolute or palette data will
be displayed, depending on what is contained in the preset.
The [Data] key can also be used (rather than [Params])in combination with the parameter category
keys to change the level of detail in summary and views, and to select parameters to view in
spreadsheet modes.
[Time] Key
Pressing and holding [Time] allows you to view discrete timing data behind any channel parameter.
[Time] exposes channel or parameter specific timing for any channels in the current cue. The first
value is the delay time. If “--” is displayed, there is no delay. The value to the right of the / is the
transition time.
[Label] Key
Pressing and holding [Label] toggles the view to show reference labels or numbers depending on
what display setting is being used. See “Show Reference Labels” on page 101.
To Next Page
Loading...
