17 Multipart Cues 231
Setting Multipart Cue Attributes
Cue attributes, such as [Time], [Delay], [Block], [Assert], [Label], [Rate], [Mark], and [AutoMark
Off] can be assigned in part cues. They are stored and function exactly as they do in single part
cues.
Cue part attributes can be defined as the parts are recorded, or they can be added after the part has
been created. For example:
• [Record] [Cue] [2] [Part] [1] [Delay] [8] [Enter]
• [Cue] [4] [Part] [3] {Color} [Time] [6] [Enter]
• [Cue] [8] [Part] [9] {AutoMark Off} [Enter]
• [Record Only] [Cue] [5] [Part] [2] [Assert] [Enter]
For more on cue attributes, see Assigning Cue Attributes, page 173.
To Next Page
Loading...
