Overture Software Manual
Page 2-10
Revision 1.5 USING OVERTURE
The user can perform the following actions:
• View will display the media files in the full format, simple list, or thumbnails.
• Cue enables the user to cue a media file on the selected device or device group. This will load
the selected media file into the device’s memory cache and output on the preview output of the
device.
• Fade In enables the user to fade in the selected media file. If the logo has not been loaded into
the device’s memory cache, this action will load the media file and fade it into the video signal.
• Fade Out enables the user to fade the selected media file out of the video signal.
• Refresh will refresh the view of the active window.
• Copy enables the user to copy media files from the device memory
• Paste enables the user to paste media files into the device memory.
• Delete enables the user to remove media files from the device memory.
• Update Metadata enables the user to update metadata information about the media file.
• Upload… enables the user to upload a media file to the device memory.
• Upgrade… enables the user to upgrade the device firmware (see section 2.2.2.3)
There is a second panel in the Device Media Contents area called Storage Drives. The Storage
Drives panel specifies the various storage media on the selected devices. By selecting *all*, all of the
files on the device will be displayed. If [card1] is selected (as in Figure 2-13), the contents of [card1]
will be displayed. Depending on the particular Media Branding device, the list of storage devices may
vary in name.
To Next Page
Loading...
