Overture Software Manual
Page 2-50
Revision 1.5 USING OVERTURE
• Font Transparency… enables the user to set the opacity of the font of the clock. The range
available is 0 to 255.
• Font Size… enables the user to set the font size of the clock.
• Use Time of Day sets the source of the clock to time of day.
• Use Timer 1 sets the source of the clock to user-defined Timer 1 on the device.
• Use Timer 2 sets the source of the clock to user-defined Timer 2 on the device.
• Delete enables the user to remove the clock.
"
In order for the Clock to function properly, the user MUST ensure the selected
Font Type is loaded onto the device. The Utopia font is on the device by default.
2.9. Creating a Temperature Indicator
To create a Temperature Image, the user can select the Temperature Indicator from the Image
Object (see 2.3.1.5). Once selected, the user will see a temperature object appear on the design
canvas as shown in Figure 2-67. The user can then set the placement of the temperature by selecting
the temperature object and dragging it to the desired position by using the mouse.
Figure 2-67: Temperature Image
To Next Page
Loading...
