Selecting and Starting a Test
94 88000 Series
Intelligent Apps
4. Ensure the laser is ON and tap the Start button from the right
navigation bar to start the test (refer to Start/Stop|TX Button on
page 741). The Summary result page will be automatically displayed
when the test is started. For additional results refer to Test Results on
page 385. The test automatically stops when the transceiver is invalid
or missing.
5. When the test ends automatically or is manually stopped, the generate
report pop-up is displayed by default. If required, tap Yes to generate a
report of the test results and statistics (refer to Report Button on
page 731 for more information).
To Next Page
Loading...
