Test Setup - Test Configurator, Timer, and System
Power Blazer 109
Test Configurator for Ethernet test applications.
Block Subtab or Pop Up
Test Application
Page
a b c d e f g h i j k
Button Modify Structure XXXXXXXXXXX 131
InterfaceCFP/QSFP/SFP XXXXXXXXXX - 164
Frequency X - XXXXXX - - - 214
Interface XXXXXXXXXXX 223
Network XXX - XXXXXXX 264
TA/TA4-... XXX - XXXX - X - 364
Protocol FlexE Group - - - X - - - - - - - 210
MAC/IP/UDP X-X-XX- - - - - 247
Services - Global X----------316
Services - L2CP X----------319
Services - Profile X----------320
Streams - Global -----X-----351
Streams - Profile -----X-----353
Test Cable Test ----------X162
Clients - BERT ---X-------183
Clients - MAC ---X-------247
Clients - Profile ---X-------166
EtherBERT ---- X------183
EtherSAM - Burst X----------191
EtherSAM - Global X----------193
EtherSAM - L2CP X----------198
EtherSAM - Ramp X----------204
Link OAM ---------X-240
RFC 2544 - Global - - X - - - - - - - - 291
RFC 2544 - Subtests - - X - - - - - - - - 294
RFC 6349 -X---------303
S-OAM / MPLS-TP OAM ---------X-306
Smart Loopback ------X----349
TCP Throughput --------X--365
Unframed BERT (up to 10GE) ----X------183
Unframed BERT (40/100GE) ----X------155
Clock Clock X-X-XXX-XX- 167
TA-SYNC X-X-XXX-XX- 364
a. EtherSAM d. FlexE BERT g. Smart Loopback j. Carrier Ethernet OAM
b. RFC 6349 e. EtherBERT h. Through Mode k. Cable Test
c. RFC 2544 f. Traffic Gen & Mon i. TCP Throughput