Test Setup - Test Configurator, Timer, and System
176 88000 Series
Device Under Test (iOptics)
For 88260 module a message is displayed when either no transceiver
systems are inserted or are all invalid:
Note: For 88260 module inserting or removing a transceiver system triggers the
transceiver system detection process resulting that the default port is
selected and results are cleared.
Tunable: For transceivers having tunable capability, (Tunable) is
written next to the transceiver module ID.
Rate: Once the transceiver is correctly detected , select the
interface rate. Rates depend on the selected port, the inserted
transceiver, and the rates supported on the module.
Status Description
Invalid Transceiver System.
No Transceiver System Detected.
Transceiver
Rate
Transport Ethernet
Fibre
Channel
Wireless
CFP8,
QSFP56-DD
- 400GE (8 Lanes) - -
OSFP - 400GE (4 Lanes) - -
CFP4, QSFP28 OTU4 (4 Lanes) 100GE (4 Lanes) - -
QSFP+ OTU3e2 (4 Lanes)
OTU3e1 (4 Lanes)
OTU3 (4 Lanes)
40GE (4 Lanes) - -
SFP28 - 25GE - -
To Next Page
