Test Setup - Test Configurator, Timer, and System
230 88000 Series
Interface
For OBSAI Framed L2 test application:
Sync indicates the RX State Machine status: green for FRAME_SYNC,
gray for pending, or red for other states. The TX and RX State Machines
are also displayed.
Force TX Idle check box when selected forces the TX State Machine to
Idle state and when cleared (default) allows the TX State Machine to
operate normally.
Scrambling check box when selected (default) enables the scrambler.
Only available with OBSAI 6.1 Gbit/s rate.
TX Seed is the start value of the scrambler training process: 0x01
(default) to 0x7F limited to the Seed values defined in the standard.
RX Seed is the current seed value detected.
Frame Clock Burst Generation check box when selected (default)
enables the generation of the frame clock burst message. Available
with base station emulation mode.
To Next Page
Loading...
