Test Setup - Test Configurator, Timer, and System
Power Blazer 285
ODU Channels - Global
Del Ch button removes the selected channel.
Delete All button removes all channels.
Assign / Unassign / Mode
To assign or unassign tributary slots:
1. From the Channel Assignation Status table, select a channel.
2. Select either Assign or Unassign.
3. From the tributary slot matrix on the right, select a tributary
slot; tributary slots are assigned/unassigned as follows
according to the selected Mode:
Mode Description
Tributary Slot Assigns/unassigns a single tributary slot.
Channel Assigns/unassigns all tributary slots for a specific channel.
After selecting a first tributary slot, subsequent tributary
slots are automatically assigned/unassigned if the channel
contains more than one tributary slot.
All Channels Assigns/unassigns all tributary slots to/from a channel and
this is repeated for all channels. After selecting the first
tributary slot, subsequent tributary slots are automatically
assigned/unassigned if the channel contains more than one
tributary slot. This is repeated for all channels in order.
To Next Page
