Test Results
414 88000 Series
Alarms/Errors Overview
Error
Symbol (FC 1X/2X/4X/8X)
RX: Invalid code-group is detected in the code.
Block (FC 10X/16X)
RX: The number of frames received with an errored block condition.
66B Block (FC 32X)
RX: The number of frames received with an errored block condition;
excluding frames in LOCWS.
FEC-CORR-CW (FC 32X)
RX: FEC codeword that contains errors and were corrected; excluding
frames in LOCWS.
FEC-UNCOR-CW (FC 32X)
RX: FEC codeword that contains error and were not corrected;
excluding frames in LOCWS.
Pre-FEC-SYMB (Pre-FEC Symbol; FC 32X)
RX: FEC symbol errors are corrected and counted once for each 10-bit
symbol; excluding frames in LOCWS.
FCS (Frame Check Sequence)
RX/TX: Frames with an invalid FCS are received/generated.
Oversize
RX: The number of received FL-2 frames larger than 2148 bytes with a
valid FCS.
Undersize
RX: FL-2 frames smaller than 36 bytes with a valid FCS.
To Next Page
Loading...
