Test Results
438 88000 Series
Alarms/Errors Overview
OOMFI (Out of OPU Multi-Frame Identifier) is only available for OPU4
of a mapped signal.
RX: OPU Multi-frame Identifier number are in error for at least
5 consecutive OTU frames.
PLM (Payload Mismatch) is available when OPU-PLM check box is
selected.
RX: The Payload Structure Identifier (PSI) field does not match the
expected PT for at least 3 consecutive frames.
MSIM Monitoring check box when selected (default) monitors the
MSIM alarm.
Errors
OMFI (OPU Multi-Frame Identifier) is only available for OPU4 of a
mapped signal.
RX: Invalid OMFI word sequence detected.
To Next Page
Loading...
