Fagor CNC 8070 - Actions (move sections and print graphics).



 Programming manual
174
CNC 8070
9.
TOOL COMPENSATION
Tool radius compensation
(SOFT V02.0X)
172
STRAIGHT-TO-STRAIGHT path
When the angle between the paths is smaller or equal to 180º, the way
radius compensation is canceled is independent from the G136/G137
and G138/G139 functions selected.
When the angle between paths is greater than 180º, the way radius
compensation is canceled depends on the functions selected for type
of ending (G138/G139) and type of transition (G136/G137).
0º < α < 90º α = 90º
90º < α < 180º α = 180º
G139/G136 G139/G137 G138
180º < α < 270º 180º < α < 270º 180º < α < 270º
α = 270º α = 270º α = 270º
270º < α < 360º 270º < α < 360º 270º < α < 360º