CNC 8070
(SOFT V02.0X)
IX
DECLARATION OF CONFORMITY
Manufacturer:
Fagor Automation, S. Coop.
Barrio de San Andrés 19, C.P. 20500, Mondragón -Guipúzcoa-
(SPAIN).
We declare:
under our responsibility that the product:
Fagor CNC8070 Numerical Control
meets the following directives:
Safety:
Electromagnetic compatibility:
As instructed by the European Community Directives 73/23/EEC,
modification 93/68/ECC on Low Voltage and 89/336/CEE on
Electromagnetic Compatibility.
In Mondragón on February 1st 2002.
EN 60204-1 Machine safety. Electrical equipment of the machines.
EN 50081-2 Emission.
EN 55011 Radiated. Class A, Group 1.
EN 55011 Conducted. Class A, Group 1.
EN 61000-3-2 Current armonics.
EN 61000-3-3 Flickers and Voltage fluctuations.
EN 50082-2 Immunity.
EN 61000-4-2 Electrostatic discharges.
EN 61000-4-4 Bursts and Fast transients.
EN 61000-4-5 High Voltage conducted pulses (Surges).
EN 61000-4-11 Voltage fluctuations and Outages.
EN 61000-4-3 Radiofrequency radiated electromagnetic fields.
EN 61000-4-6 Conducted disturbance induced by radio frequency fields.
To Next Page
Loading...
