Programming manual
326
CNC 8070
12.
CYCLE EDITOR
Slot milling
(SOFT V02.0X)
318
Basic operation:
1. It selects the roughing tool and starts the spindle in the requested
direction.
2. Rapid movement (G0) to the roughing starting point and the safety
plane (Zs).
Depending on the starting plane, it first moves in XY and then in
Z or vice versa.
3. Rapid movement (G0) up to the approach plane.
4. Roughing operation.
It is carried out in layers, until reaching the total depth minus the
finishing distance "δz".
To Next Page
Loading...
