RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
16-5
Print Test Image, Setup Printer, Show Error Count, Show
Card Count and System Upgrade, 11-1
print the first page of a two-page document, 7-33
Print Timeout Error, 4-9
Print Width, 2-7, 7-14, 7-16
Print YMC Under K and Print K Only options, 7-53
Print YMC Under K/Print K Only options, 7-53
Print/Transfer Stations, 9-12
printed image, 7-44
printed text and barcodes, 7-53
Printer, 2-19
Printer, 11-3
Printer, 11-4
Printer Cleaning Kit, 8-5, 8-10, 8-11, 9-12
Printer Components, 2-15, 2-16
Printer Driver setup, 7-45
Printer's Firmware, 12-4
Printer's memory full, 7-36
Printhead, 2-15, 15-15
Printhead cleaning, 8-5
Printhead Cleaning Pen, 8-5
Printhead Resistance, 11-18
Printhead Temp, 4-6
Printing Method, 2-11
Proper Settings, 7-6
Prox Card Encoder, 15-15
Prox card encoder not installed., 4-9
Proximity cards, 2-23
PVC, 15-15
PVC laminate, 2-23
Q
Queue, 15-15
R
RAM (Random Access Memory), 15-15
RAM Memory Error, 10-3
Rasterize, 15-15
Reboot, 15-15
recorded magnetic data, 7-63
Registration, 15-15
Regulatory Compliances, 2-6
Replacing the Card Cleaning Tape, 8-6
Resident Font, 15-15
Resin, 15-15
resin black (K) Panel, 7-48, 7-49, 7-50, 7-53
Resin Black Panel, 2-22
resin dither, 7-30
Resin Heat slide, 7-40
resin images, 7-40
Resin Thermal Transfer, 2-15
Resolution, 15-16
retries, 7-62
RFI (Radio Frequency Interference), 15-16
RFID (Radio Frequency Identification), 15-16
RGB, 4-18
RGB (Red/Green/Blue), 15-16
Ribbon, 15-16
Ribbon / Cards, 1-2
Ribbon cable, 15-16
Ribbon Drive adjustment, 11-17
Ribbon is out!, 4-10
ribbon Panels, 7-32
Ribbon Release Timeout Error, 4-10
Ribbon Sensor, 10-4
Ribbon Tension adjustment, 11-16
ribbon type, 7-26, 7-27
Ribbon/Cards, 7-3, 8-3
RibbonTraq, 15-16
RibbonTraq marks, 10-4
Right Cards, 7-5
Right Cards/HDP Print Process, 7-5
RMA number, 15-16
Roller, 15-16
rotate front by 180 Degrees, 7-35
rotates image, 7-35
RS-232, 15-16
S
safety issues, 1-2, 2-2, 3-3, 6-3, 7-3, 8-3
Safety Standards, 2-6
Saturation, 15-17
Save this Program to Disk, 12-3
Scroll Buttons, 2-16
second K Panel, 7-32
SELECT FUNCTION screen, 11-1
Select Printer button, 12-4, 12-7
Select Update File button, 12-4, 12-7
Self-test, 15-17
Sending Update to Printer dialog, 12-6, 12-7
Sensor, 15-17
Sensor Location and Voltages, 10-4
Sensor Testing, 10-4
Serial interface, 15-17
Setting the Magnetic TOF, 11-23
SETUP.EXE file, 12-2
Shift Data Left option, 7-63
Show Card Count option, 11-28
SIMM, 15-17
Simplex, 15-17
Smart Card, 15-17
Smart card encoder not installed., 4-10
smart chip, 7-5
SmartGuard, 15-17
SmartGuard™, 15-17
SmartShield™, 15-17
Softkey Buttons, 2-15, 2-17
Software, 15-17
Software Drivers, 2-13
Software Drivers, 2-10
Solid GREEN, 2-20
special precautions, 1-2, 7-3, 8-3
Split 1 Ribbon Panels, 7-32
Spooler, 15-17
Spooling, 15-18
SS (Start Sentinel), 15-18
SS distance (inches), 11-22
SS distance (millimeter), 11-22
SS, ES, FS, 7-65
Stacker, 15-18
To Next Page
Loading...
