RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
iv
Installation Procedures ______________________________________________________________ 3-32
Installing the HDP600 Printer Driver_________________________________________________ 3-32
Printing a Test Print Image ___________________________________________________________ 3-51
Card Lamination Module Installation ___________________________________________________ 3-54
Introduction ____________________________________________________________________ 3-54
Inspecting the Card Lamination Module ______________________________________________ 3-55
Unpacking the Card Lamination Module ______________________________________________ 3-55
Choosing a proper Location ________________________________________________________ 3-55
Preventing Moisture Condensation___________________________________________________ 3-55
Installing the HDP600 Series Card Lamination Module_____________________________________ 3-56
Installing the Printer Diagnostic Utility__________________________________________________ 3-63
Printing a Test Print Image ___________________________________________________________ 3-70
Section 4: General Troubleshooting __________________________________________4-1
Table of Contents ___________________________________________________________________ 4-1
LCD Messages _____________________________________________________________________ 4-2
Reviewing LCD Messages __________________________________________________________ 4-2
General Troubleshooting Guide _____________________________________________________ 4-11
Magnetic and E-card Troubleshooting Guide___________________________________________ 4-15
Printing a Test Image _______________________________________________________________ 4-17
Reviewing the Gray/Align YMC/K Self-Test __________________________________________ 4-17
Reviewing the Color/Resin YMCK Self-Test __________________________________________ 4-18
Reviewing the Color Bars YMC Self-Test_____________________________________________ 4-18
Reviewing the Card Count Self-Test _________________________________________________ 4-19
Reviewing the Magnetic Test option _________________________________________________ 4-19
Reviewing the Lamination Color/Resin YMCK+L Self-Test ______________________________ 4-20
Section 5: Ethernet Option Section ___________________________________________5-1
Table of Contents ___________________________________________________________________ 5-1
Introduction________________________________________________________________________ 5-3
Technical Specification - Ethernet Option ________________________________________________ 5-3
Functional Specification - Ethernet Option________________________________________________ 5-4
Network Services - Overview ____________________________________________________5-5
Reviewing the Print Server__________________________________________________________ 5-5
Reviewing the Web Page Server _____________________________________________________ 5-5
Reviewing the Network Management Interface __________________________________________ 5-5
Reviewing the Telnet Server ________________________________________________________ 5-5
Network Management Interface _________________________________________________5-6
Telnet Command Line Interface _________________________________________________5-6
Initiating a Telnet Session __________________________________________________________ 5-6
Reviewing the Telnet Command Table ________________________________________________ 5-7
Ethernet Web Pages – Standard Procedures ______________________________________5-13
Reviewing Web page security_________________________________________________________ 5-13
Logging In________________________________________________________________________ 5-14
Accessing the Home pages ___________________________________________________________ 5-15
Reviewing the HDP600 Home Page__________________________________________________ 5-16
Reviewing the Home Page Categories and Fields (table)__________________________________ 5-17
Configuring the Network Settings______________________________________________________ 5-18
Accessing the Network Settings page_________________________________________________ 5-18
Reviewing the Interface ___________________________________________________________ 5-19
Reviewing the Current Settings _____________________________________________________ 5-20
Switching to the automatic IP address mode ___________________________________________ 5-21
Changing to the static IP address mode _______________________________________________ 5-22
Entering the TCP Window Size _____________________________________________________ 5-24
To Next Page
Loading...
