FARGO electronics HDP820 - Page 17

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
3
Resolving the HDP Film wrinkle problems_______________________________ 119
Resolving the incomplete Transfer problems _____________________________ 121
Resolving an incomplete transfer on the leading edge problem _______________ 122
Resolving an incomplete transfer on the trailing edge problem _______________ 122
Resolving the Image Placement problems ________________________________ 123
Resolving the poor Image Quality problems ______________________________ 127
Resolving the Image washout on Film problems___________________________ 128
Resolving the Registration problems ____________________________________ 129
Resolving the Card Skewed Image problems _____________________________ 131
Printing a Test Image __________________________________________________ 132
Reviewing the Gray/Align YMC/K Self-Test _____________________________ 132
Reviewing the Color/Resin YMCK Self-Test _____________________________ 133
Reviewing the Color Bars YMC Self-Test _______________________________ 133
Reviewing the Card Count Self-Test ____________________________________ 134
Reviewing the Magnetic Test option ____________________________________ 134
Reviewing the Lamination Color/Resin YMCK+L Self-Test _________________ 135
Section 3: Card Lamination Module______________________________________ 136
Safety Messages (review carefully) _______________________________________ 136
Opening the Card Lamination Module __________________________________ 137
Loading the Overlaminate ____________________________________________ 140
Adjusting the Card Lamination Module ___________________________________ 143
Adjusting the Card Flattener __________________________________________ 143
Adjusting the Card Guide Rail_________________________________________ 145
Adjusting the Internal Card Guide ______________________________________ 149
Attaching the Card Lamination Module _________________________________ 152
Section 4: Printer Adjustments __________________________________________ 164
Safety Messages (review carefully) _______________________________________ 164
Adjusting the Card Size ________________________________________________ 165
Adjusting the Card Input Guide ________________________________________ 166
Adjusting the Card Stacker Output Guide ________________________________ 170
Adjusting the Internal Card Guide ______________________________________ 173
Adjusting the Card Thickness Knob ____________________________________ 176
Fine-Tuning the Card Separator Adjustment Assembly (D840995) ______________ 177
Printing on Alternate Card stocks ________________________________________ 178
Selecting the Right Cards and optimize the HDP Print Process _______________ 178
Selecting the Appropriate HDP Printer Driver settings ______________________ 179
Conducting the Tape Adhesion Test ____________________________________ 181
Printer Driver Options _________________________________________________ 184
Installing Printer Driver Updates _______________________________________ 184
Setting Up the Printer Driver ____________________________________________ 186
Setting up Windows 98SE/Windows Millennium __________________________ 186
Setting up Windows NT/Windows 2000/Windows XP______________________ 186
Using the Device Options tab ___________________________________________ 187
Adjusting the Ribbon Type ___________________________________________ 188
Adjusting the Film Type _____________________________________________ 189
Adjusting for the color matching _______________________________________ 190