RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
222
Reviewing the Magnetic Track Options
Use these options to customize the ISO encoded data format for each of the Magnetic
Stripe's three tracks.
Step Procedure
1 Specify which of the three (3) tracks to customize by selecting one of the three
track options.
• After making the required selection, the Magnetic Track Options box displays
the current set of customization options for the selected track.
• Remember that each track must be customized independently of the other
two.
To Next Page
Loading...
