RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
80
Resolving the magnetic stripe Data being printed on a Card problem
Step Procedure
1 Confirm that the application is formatting the magnetic string correctly. See the
Sending the Track Information
procedure in Section 3, page 227.
2
Use WordPad (a Windows 95/ 98/ ME/ NT/ 2000/XP word processing program
in the Accessories Program Group).
a. Open the program and type: “~1%JULIEANDERSON^1234567890?”
b. Select File > Page Setup and click on the Printer button.
c. Ensure that the HDP800 Series Card Printer is selected and click OK.
d. Change all the margin settings to zero (0) and click OK.
e. Select File > Print on the Menu Bar.
f. Go to File on Menu Bar and select Print. (Note: The Printer should then
feed a card into the Encoder and magnetically encode it.)
To Next Page
Loading...
