RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
190
Adjusting for the color matching
Allows selection of the color matching option that best fits the requirements of the print job.
Step Procedure
1
Select None (a) if interested in print speed rather than print color, (b) if color
correcting the image for printing has already been done or (c) if using third party
color matching software.
OR
Select Algebraic to allow the Printer Driver to make very simple, fast, color
balance adjustments. (Note: This option gives a natural-looking image without
slowing down the processing speed of the Printer Driver. It also allows further
customization of the printed color of the cards through the Image color tab.)
OR
Select Monitor to allow the Printer Driver to make color corrections similar to the
Algebraic option but through a more complex color matching algorithm. (Note:
This option shifts colors more radically so the colors in the image will more
closely match how they appear on screen.)
To Next Page
Loading...
