FARGO electronics HDP820 - Technical Specifications

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
12
Technical Specifications
Term Description
Accepted
Standard Card
Sizes
HDP820/820-LC:
• CR-80: 3.375 in. x 2.125 in. (85.6mm x 54mm) (corresponds to
ID1)
• CR-90: 3.63 in. x 2.37 in. (92mm x 60mm)
• CR-100: 3.88 in. x 2.63 in. (98.5mm x 67mm); laminate with CR-
90 or CR-100 size PolyGuard only if laminating with HDP800
Series-LC
HDP825/825-LC:
• CR-80: 3.375” L x 2.125” W/85.6mm L x 54mm W
Accepted Card
Thickness
.030 in. (30 mil) to .070 in. (70 mil) (.762mm to 1.778mm). (30 mil
maximum for CR-100 size cards)
(.030" to .040"/.762mm to 1.02mm if laminating with HDP800 Series-
LC; thicker cards are allowed to pass through the Lamination Module if
you choose to print-only)
Accepted
Electronic Card
types
HID Proximity Cards, MIFARE Contactless Smart Cards and Contact
Smart Cards
Accepted Card
Compositions
ABS, PVC, PET and PETG
Colors Up to 16.7 million colors and 256 shades per Pixel.
Card Capacity
HDP820/HDP820-LC: 250 cards (.030"/.762mm); auto or manual
feed
HDP825/HDP825-LC: 200 cards (.030"/.762mm) auto or manual feed
Dimensions
• HDP820/825: 15” H x 26.1” W x 14"D/381mm H x 663mm W x
356mmD
• HDP820-LC/825-LC: 15” H x 34.75” W x 14"D/381mm H x
883mm W x 356mmD
• LC Module: 14.2” H x 13” W x 10”D/362mm H x 330mm W x
254mmD