RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
253
Cleaning the Card Feed Rollers (additional Feed Rollers) (continued)
Steps Procedure
2
Use a Cleaning Pad from the Printer Cleaning Kit to wipe the rollers clean. (Note:
Use fingertips to move the rollers back and forth while cleaning.)
3 Open the Front Access Door and then open the Print Station and Transfer Station
of the Printer.
If using a Printer with a Card Lamination Module attached, open the Lamination
Module's Top Cover and Lamination Station.
Continued on the next page
To Next Page
Loading...
