FARO
®
Laser Scanner Manual
104
Chapter 7: Controller Software
Format Card - Format the inserted SD card.
Log File Important scanner operations, sensor data as well as warnings and errors will
be saved to the log file that can help customer service to identify problems and
the cause of possible errors.
Figure 7-77: Service, Log File
Export - Writes the scanner log file to the SD card. It will be saved to a folder
called “Logfile”.
Clear - Clears the contents of the log file on the scanner.
Backup Automatic backup
The scanner creates an automatic backup of the scanner settings and saves it
to the inserted SD card. This backup will automatically be updated with the
NOTICE
Format the inserted SD card. This operation will delete all
scans and other data of the SD card. Always use this
formatting function for SDXC cards with a capacity of 64GB
or more as Windows will format such cards with its own file
system which is not supported by the scanner.
For more information, see
Preparing an SD Card on
page 30.
To Next Page
Loading...
