FARO
®
Laser Scanner Manual
49
Chapter 6: Getting Started
Figure 6-31: Scanning View
To stop a scan, touch the Stop Scan button in the scanning view. You will then
be asked to keep or delete the incomplete scan.
As soon as the entire scanning process is complete, the scanner plays a
notification sound (if not turned off in the settings) and a new screen appears
with a preview picture of the captured scan. Now, you may move the scanner
to the next scan position and start a new scan.
After having completed scanning and capturing the pictures,
depending on environmental conditions, the scanner may make
another full turn to capture inclination data. It is important NOT
to move the scanner while it is capturing the inclination data, or
the inclination data of the scan may be inaccurate and may not
be usable for the scan registration.
To Next Page
Loading...
