FARO
®
Laser Scanner Manual
71
Chapter 7: Controller Software
Figure 7-50: View Project
Here, you can change the name and enter further details of the new project. If
you want the new project to be a main project without any parent projects, you
must either change its parent project to No Parent Project, or select the
Default_Project before adding the new project. With the Default_Project,
selected new projects will be added as a main project without parent projects.
Project Name The name of the item. Tap to change the name. A name must start with a letter
and may contain letters, digits, and underscores.
Parent Project The parent project of the displayed item. “No Parent Project” means that the
current item is a project and not a cluster. Tap this button to change the parent
project or parent cluster. A new screen appears with a list of all available
parent projects or parent clusters. Select the parent project/cluster from this
list. The currently edited item will then be assigned as a cluster to this project/
cluster.
To Next Page
Loading...
