Final Width = 215mm
Model 9500B User's Handbook — Safety Section 0-11
Final Width = 215mm
Maintenance and Repair
Observe all applicable local and/or national safety regulations
and rules while performing any work. First disconnect the
instrument from all signal sources, then from the AC line supply
before removing any cover. Any adjustment, parts replacement,
maintenance or repair should be carried out only by the
manufacturer's authorised technical personnel.
WARNING FOR PROTECTION AGAINST INJURY
AND FIRE HAZARD, USE ONLY
MANUFACTURER SUPPLIED PARTS
THAT ARE RELEVANT TO SAFETY.
PERFORM SAFETY TESTS AFTER
REPLACING ANY PART THAT IS
RELEVANT TO SAFETY.
Observe any additional safety instructions or warnings given in this manual.
Moving and Cleaning
First disconnect the instrument from all signal sources, then
from the AC line supply before moving or cleaning. See Section
8.2 for Routine Maintenance procedures.
To Next Page
Loading...
