Final Width = 215mm
0-8 Model 9500B User's Handbook — Safety Section
WARNING THIS INSTRUMENT CAN DELIVER A
LETHAL ELECTRIC SHOCK. NEVER
TOUCH ANY LEAD OR TERMINAL
UNLESS YOU ARE ABSOLUTELY
CERTAIN THAT NO DANGEROUS
VOLTAGE IS PRESENT.
General Safety Summary
This instrument has been designed and tested in accordance with
the British and European standard publication EN61010:1993/
A2:1995, and has been supplied in a safe condition.
This manual contains information and warnings that must be
observed to keep the instrument in a safe condition and ensure
safe operation. Operation or service in conditions or in a manner
other than specified could compromise safety. For the correct
and safe use of this instrument, operating and service personnel
must follow generally accepted safety procedures, in addition to
the safety precautions specified.
To avoid injury or fire hazard, do not switch on the instrument
if it is damaged or suspected to be faulty. Do not use the
instrument in damp, wet, condensing, dusty, or explosive gas
environments.
Whenever it is likely that safety protection has been impaired,
make the instrument inoperative and secure it against any
unintended operation. Inform qualified maintenance or repair
personnel. Safety protection is likely to be impaired if, for
example, the instrument shows visible damage, or fails to
operate normally.
Explanation of safety related
symbols and terms
DANGER electric shock risk
The product is marked with this symbol to indicate
that hazardous voltages (>30 VDC or AC peak)
may be present.
CAUTION refer to documentation
The product is marked with this symbol when the
user must refer to the instruction manual.
Earth (Ground) terminal
Functional Earth (Ground) only - must not be
used as a Protective Earth.
WARNING WARNING STATEMENTS IDENTIFY
CONDITIONS OR PRACTICES THAT
COULD RESULT IN INJURY OR DEATH.
CAUTION CAUTION STATEMENTS IDENTIFY
CONDITIONS OR PRACTICES THAT
COULD RESULT IN DAMAGE TO THIS
OR OTHER PROPERTY.
SAFETY ISSUES
READ THIS ENTIRE SECTION THOROUGHLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THE MODEL 9500B
To Next Page
Loading...
