Fluke DTX Series - Smart Remote Mode Autotest Results

DTX Series CableAnalyzer
Technical Reference Handbook
5-20
Smart Remote Mode Autotest Results
The Summary screen appears when the test is finished.
To see more detailed results, use
D to highlight a
measurement; then press H.
Figure 5-9 describes the Summary screen and loss results
screen for an unsaved, single-directional Autotest in
Smart Remote mode.
For bi-directional results in Smart Remote mode, see
“Bi-Directional Testing” on page 5-38.
1
3
7
4
5
6
8
2
amd26f.eps
Figure 5-9. Smart Remote Mode Summary and Loss Result Screens (unsaved, single-directional)