Maintenance and Specifications
Specifications 9
9-31
Visual Fault Locator
Output power* 316 µw (-5 dBm) ≤ peak power ≥ 1.0 mw (0 dbm)
Operating wavelength 650 nm nominal
Spectral width (RMS) ± 3 nm
Output modes Continuous wave and pulsed mode (2 Hz to 3 Hz blink frequency)
Connector adapter 2.5 mm universal
Laser safety Class II CDRH
* Into SMF-28 singlemode fiber, continuous wave and pulse modes, SC/UPC connector.
Tone Generator
Generates tones that can be detected by a tone probe,
such as a Fluke Networks IntelliTone
probe. The tones
are generated on all pairs.
Frequency range of tones: 440 Hz to 831 Hz
To Next Page
Loading...
