Fluke DTX Series - DTX-MFM Multimode Fiber Modules (optional); DTX-SFM Singlemode Fiber Modules (optional)

To Next Page

To Previous Page

Getting Acquainted

Unpacking 1

1-5

DTX-MFM Multimode Fiber Modules (optional)

• Two DTX-MFM Fiber Modules for testing at 850 nm

and 1300 nm

• Two SC/SC adapters

• Four 62.5 /125 µm multimode patch cords, 2 m, SC/SC

• Two 62.5 /125 µm multimode patch cords, 0.3 m,

SC/SC

• Two gray mandrels for 62.5 /125 µm fiber with 3 mm

jackets

• DTX-MFM/SFM Fiber Modules Users Manual

• DTX CableAnalyzer Product CD

• LinkWare Software CD

DTX-SFM Singlemode Fiber Modules (optional)

• Two DTX-SFM Fiber Modules for testing at

1310 nm and 1550 nm.

• Two SC/SC adapters

• Four 9/125 µm singlemode patch cords, 2 m, SC/SC

• Two 9/125 µm singlemode patch cords, 0.3 m, SC/SC

• DTX-MFM/SFM Fiber Modules Users Manual

• DTX CableAnalyzer Product CD

• LinkWare Software CD

Note

The patch cords provided are suitable for testing

SC-terminated links. Other patch cords are

required for other connector types or 50 /125

fiber. Many are available as accessories from

Fluke Networks.

Other manuals for Fluke DTX Series