Fluke DTX Series - Loopback Mode Autotest Results

DTX Series CableAnalyzer
Technical Reference Handbook
5-28
Loopback Mode Autotest Results
The Summary screen appears when the test is finished.
To see more detailed results, use
, to highlight a
measurement; then press
0.
Figure 5-13 describes the Summary screen and loss results
screen for a single-directional Autotest in Loopback mode.
For bi-directional results in Loopback mode, see
“Bi-Directional Testing” on page 5-38.
1
3
7
4
5
6
8
2
amd27f.eps
Figure 5-13. Loopback Mode Summary and Loss Result Screens (single-directional)