Fluke DTX Series - 2. Tutorials on Setup and Test Procedure; Preparing to Save Tests; Step 1: Checking the Memory Space Available

2-1
Chapter 2
Tutorials on Setup and Test Procedure
The tutorials in this chapter guide you through setting up
the tester, checking the tester’s status, testing twisted
pair and fiber cabling, and setting up cable ID lists.
Preparing to Save Tests
Step 1: Checking the Memory Space Available
1-1 DTX-1800, DTX-1200: Insert a memory card into the
tester.
1-2 Turn the rotary switch to SPECIAL FUNCTIONS.
1-3 Use
D to highlight Memory Status; then press
H.
1-4 DTX-1800, DTX-1200: Press
J Int. Memory to
switch between memory card and internal memory
status.